jetpro pipes???`

[badboy2]

does the jetpro pipe fits all nutech models???why is fuego cheaper than the others??

[Nutech Racing U.S.A]

does the jetpro pipe fits all nutech models???why is fuego cheaper than the others??

Hello
We offer 3 different Jetpro pipes for the Nutechs to fit under the specific bodies, this is the one for the TB II http://www.zerogravityrc.com/jetpropipe1.aspx it smaller then the rest because of the buggy body and it exits in the rear. Here is the one for the sandstorm, mega and fuego http://www.zerogravityrc.com/jetpropipemegamonstertruck.aspx this is a little bigger then the TB II pipe and it wraps around the front of the engine and comes down in front of the air filter for the larger bodies.

This is the one for the GT5R http://www.zerogravityrc.com/jetpropipenutechgt5r.aspx this is made specifically for the GT5R to fit under the body and actually wraps around the top of the engine.

As for the Fuego depending on where you are getting it they should be close to the rest accept for the GT5R, TB II in US dollar retails for $849.99, Sand Storm $919.00, Fuego $989.00 and the Mega at $999.00 but some dealers are a little different.

Thank You,
Scott
Zero Gravity RC

[mynameismud76]

Hello
We offer 3 different Jetpro pipes for the Nutechs to fit under the specific bodies, this is the one for the TB II http://www.zerogravityrc.com/jetpropipe1.aspx it smaller then the rest because of the buggy body and it exits in the rear. Here is the one for the sandstorm, mega and fuego http://www.zerogravityrc.com/jetpropipemegamonstertruck.aspx this is a little bigger then the TB II pipe and it wraps around the front of the engine and comes down in front of the air filter for the larger bodies.

This is the one for the GT5R http://www.zerogravityrc.com/jetpropipenutechgt5r.aspx this is made specifically for the GT5R to fit under the body and actually wraps around the top of the engine.

As for the Fuego depending on where you are getting it they should be close to the rest accept for the GT5R, TB II in US dollar retails for $849.99, Sand Storm $919.00, Fuego $989.00 and the Mega at $999.00 but some dealers are a little different.

Thank You,
Scott
Zero Gravity RC



Do you think the Jetpro for the Sandstorms (etc) would fit under the bug shell?

[badboy2]

im sorry i meant the sandstorm..i see in your site for sandstorm is $699..

[Nutech Racing U.S.A]

Do you think the Jetpro for the Sandstorms (etc) would fit under the bug shell?

The only one that will fit under the TB II shell from Jetrpo is the TB II Pipe, the sand storm you can use the TB II pipe or the Mega pipe but the only one that will fit under the TB II shell is the TB II pipe.


im sorry i meant the sandstorm..i see in your site for sandstorm is $699..

Just running a special on them as I took the most of those from the factory, if you look on my home page its under the Special of the Week :punk: just trying to get these out in the hands of consumers because I know they will love them.

It a tough economy right now which is why I ran a special on those, pricing will be going back up to the $919 RTR once the sale is over.

Thank You,
Scott
Zero Gravity RC

[mynameismud76]

[QUOTE=zerogravityrc;11925]The only one that will fit under the TB II shell from Jetrpo is the TB II Pipe, the sand storm you can use the TB II pipe or the Mega pipe but the only one that will fit under the TB II shell is the TB II pipe.


Cool, my Jetpro at the moment isn't race legal =(

Just looking at alternatives..other than the stock bean can..LOL

[Nutech Racing U.S.A]

[QUOTE=zerogravityrc;11925]The only one that will fit under the TB II shell from Jetrpo is the TB II Pipe, the sand storm you can use the TB II pipe or the Mega pipe but the only one that will fit under the TB II shell is the TB II pipe.


Cool, my Jetpro at the moment isn't race legal =(

Just looking at alternatives..other than the stock bean can..LOL

How come its not race legal (because it doesnt have any baffles?) the other option is the dual pipes that will fit under your body no problem (it actually hangs off the back tucked in the rear roll-cage bumper area) I haven't ran any of them yet so I don't know what kind of performance you get from them but it might be an option. http://www.zerogravityrc.com/dualpipes.aspx

Thank You,
Scott
Zero Gravity RC

[mynameismud76]

[QUOTE=mynameismud76;11926]

How come its not race legal (because it doesnt have any baffles?) the other option is the dual pipes that will fit under your body no problem (it actually hangs off the back tucked in the rear roll-cage bumper area) I haven't ran any of them yet so I don't know what kind of performance you get from them but it might be an option. http://www.zerogravityrc.com/dualpipes.aspx

Thank You,
Scott
Zero Gravity RC


The BRCA ruling says any exhausts that's exposed is illegal, for fear of burning the marshalls (whoever races marshalls other heats).

I really like my TBII Jetpro, and wonder if Dino would do a underbody (how's about under the TBII FatBoy body?) pipe. :good idea:

[Pipeous]

I just emailed Dino about the rule and getting an under the body pipe. we'll see what he can come up with

[mynameismud76]

Cool, keep us posted please Pipeous.

By the way, what's the ruling regarding racing with exhausts in North American series?

[Pipeous]

Dino said the problem is there is no room to put one inside the buggy. with the wide mud guards and ody you could just toss a side pipe on. I need to send him the pics of those wide guards

[Pipeous]

ok I have been emailing back and forth with Dino last night and this morning. Chris was supposed to send him the wide mud guards and body to work on a pipe to fit but nothing was sent. He could use a set, at least the mud guards, as a template and would be pumping out a real pipe that is race legal in no time...

any distributors able to step up and make this happen?

[Nutech Racing U.S.A]

There isn't much room under that body it will be interesting to see what they come up with :punk:..

Thank You,
Scott
Zero Gravity RC

[Nutech Racing U.S.A]

Dino said the problem is there is no room to put one inside the buggy. with the wide mud guards and ody you could just toss a side pipe on. I need to send him the pics of those wide guards

Working on it as we speak :-), another option mud is you can run the beetle body and then you can use the Mega pipe that fits under the beetle body no problem. I sent an email off to Ethan to see how soon they could get me a wide body and mud guards so I can get it off to Jetpro.

Thank You,
Scott
Zero Gravity RC

[mynameismud76]

Working on it as we speak :-), another option mud is you can run the beetle body and then you can use the Mega pipe that fits under the beetle body no problem. I sent an email off to Ethan to see how soon they could get me a wide body and mud guards so I can get it off to Jetpro.

Thank You,
Scott
Zero Gravity RC



Thanks Scott, the Beetle shell is another option (since there's a pipe for it already and all).

O, I though it was only CML (Nutech UK) who's waiting on the Fatboy plus guards.

[Nutech Racing U.S.A]

Thanks Scott, the Beetle shell is another option (since there's a pipe for it already and all).

O, I though it was only CML (Nutech UK) who's waiting on the Fatboy plus guards.

Not sure about CML, the sooner we can get one to them the sooner we can all have a pipe for the TB II :-) so I figured I would get some coming from the factory as well.

Thank You,
Scott
Zero Gravity RC

[mynameismud76]

Not sure about CML, the sooner we can get one to them the sooner we can all have a pipe for the TB II :-) so I figured I would get some coming from the factory as well.

Thank You,
Scott
Zero Gravity RC


Swwwwwweeeeeet as a nut!! :punk:

[Nutech Racing U.S.A]

Wide bodies showed up this morning :-), now I just have to get one cut out and installed so I can ship it off to Jetpro.

Thank You,
Scott
Zero Gravity RC

[Freeprawn]

Fat boy bodies and beetle shell as well as a load of Destroyer hop ups will be coming into stock next week in my shop. :punk:

I'm also expecting a delivery of shiny new jetpro pipes very soon too. :punk::punk:

Once the shells are in an exhaust pipe will follow :)

N

[mynameismud76]

That's great news ZeroGravity and FreePrawn =)