Jetpro titan pipe

[bentley marshall]

Well the carson side pipe i was using was sitting way to low and ended up geting taken out and dented very bad
so a mate of mine had a spare jetpro titan pipe so got it for a good price
looks like its going to fit with a little work
will be making a steel rollcage like moo has and will allso fit a redcat/homoto fuel tank becouse with the titan pipe fitted i wont be able to take the cap on the nutech tank and allso my tanks is broken so i need a replacement any way

heres some pics
http://i43.photobucket.com/albums/e372/1bent1/P1000163.jpg
http://i43.photobucket.com/albums/e372/1bent1/P1000164.jpg
http://i43.photobucket.com/albums/e372/1bent1/P1000162.jpg

[NUTECH RACING]

Another nice looking "Sausage",when will you have videos?:punk:

[bentley marshall]

lol sausage lol videos prob not till next year i have a lot of work to do on the car

[VancouverHobbies]

Looks good Bentley, I think we are pretty lucky that there are a few pipes out there already that almost bolt up perfectly. :excited:

[Clubin]

Looks like it has lots of potential.

[mooman007uk]

Looks good Bentley, I think we are pretty lucky that there are a few pipes out there already that almost bolt up perfectly. :excited:

I guess nearly all the 5b side pipes would be close and titan pipes...also with the mielke header and some kid's bike handlebar like you did and most pipes could be made to work pretty easily

i don't think it'll be too long before we see dedicated pipes, i reckon it wont be long before volume sales of nutechs get pipe builders interested

[mradlin]

I figure if some of us call Dino at Jetpro and inquire about the chance of a dedicated pipe built for the Nutechs, it may just happen. :punk:
Here's a number to contact Dino. 1-800-4-jetpro.

[highwaystar]

The last time Dino and I talked he asked me if I knew anything about these cars. To be honest , I told him no. I need to get ahold of him again, so this time I will see what i can get out of him. I know he is making some new products for the 5b/t other than pipes, some cool heavy duty basher parts.

[mradlin]

The last time Dino and I talked he asked me if I knew anything about these cars. To be honest , I told him no. I need to get ahold of him again, so this time I will see what i can get out of him. I know he is making some new products for the 5b/t other than pipes, some cool heavy duty basher parts.

Now that's some promising news highwaystar!!! :excited:

[highwaystar]

Now that's some promising news highwaystar!!! :excited:

How is this for exciting? I just got off the phone with Dino, he is interested in the Nutech line, He said he would be up for making us some nice purpose made pipes.I have P.M.ed Ethan in hopes that we can get someting going.

[mradlin]

That is some great news!!! :dance:

[bentley marshall]

got soem more time the last few days got the pipe all fitted up and ended up moding the roll cage to fit over the pipe
all so new zenoah g270 going in at the same time

just waiting for the new rampage fuel tank and the car will be all go again..:party time:

any way heres some pics

[NUTECH RACING]

got soem more time the last few days got the pipe all fitted up and ended up moding the roll cage to fit over the pipe
all so new zenoah g270 going in at the same time

just waiting for the new rampage fuel tank and the car will be all go again..:party time:

any way heres some pics


Nice mods Bentley,

never had a chance to drive Zen g270, can't wait to see your video with the Jep Pro Titan sausage.:excited:

[mooman007uk]

that sausage is a nice fit ((oooer sounds like something Jemma Jameson would say:excited:), does the tb body still fit?

[bentley marshall]

not sure about tb2 body will have to go round to see bryan and try his on
i have put a 100mm tube on the front of rollcage and i had to put the rear cage mount on the rear side if the shock tower
the cage is now higher than the sparkplug ...

[sickboy]

Looking good there Bentley its amazing wat you can do to this car and it even came out better than it was with the roll cage higher now nice job

[bentley marshall]

got the new fuel tank yesterday
run in to a minor snag the rollcage was in the way so the tank wouldint go all the way back so i had to remount the steering servo to get the tank in
the servo mounts now under the drive shaft
allso had to shorten up the front chassis brace
heres some picks sorry they are a bit dark my flash has stoped working dont know why but being 8 years old might have something to do with itLOL

[RCKIWI]

Can't see anything take it outside for the pics is still daylightLOL

[bentley marshall]

hope these pics will be better

is that better for your old eyes LOL

[RCKIWI]

Now thats alot betterLOL

[sickboy]

I do like the way the servo is sitting now that's gets it way up there away from water.

[mooman007uk]

nice mods..now we just need some video :)