Jet Pro TBII Sneak Peek!!!

[highwaystar]

Here you go fellas this one is a pic of the rear pipe.

http://i437.photobucket.com/albums/qq97/chassidy9881/PIC000171.jpg

[Pipeous]

sweet... black pipe with the black wing. at least I know my buggy has a black wing now LOL

[highwaystar]

You may want to check with him I think it will be offered in chrome. He may have plans to chrome that one, I'm not sure.

[mooman007uk]

now that looks good, 'fraid i'm a non chrome fan so bare metal as shown gets my vote..now we just need to see some vid of how it runs

[NUTECH RACING]

Great looking pipe, I like the design!:surprise: Can't wait to see the video, plase "photobucket" video!:excited::dance::boxing:

[NUTECH RACING]

I will post the picture on different forums.

[Clubin]

Looks good. Dare I ask if there is a side pipe in the works?

[Pipeous]

yes a side pipe was being done as well. I was supposed to call today but figured I'd give him the extra day to get it together (that and I was woken up with bloody furnace and water heater inspectins, just got woken up to buy a mamba max now too lol) . chrome or not it looks very protected. it's just down in Spokane, so really close

[roccos_van]

Barry Spokane is a 6 hour drive! LOL! I bought the wife's X3 from there a year and a half ago.

Love, love, LOVE the rear pipe, looks well protected!!! Man I am itchin to pull the trigger but gotta be patient!

[mradlin]

The Jetpro pipe is looking great!!! :surprise: Any idea where they'll be available when ready? :excited:

[Pipeous]

My problem with borders is, I was arrested of a most heinous crime over 15 yrs ago and got a $25 fine... I can't cross the border LOL. Why I do the Canadian races in BC and Alberta. It's rather funny. I have been security at an International Port, worked security for Politcal Campaigns, had my clearance card for VANOC, been in bank vaults, Diamond Merchants, hell I even patrolled Naslund's house and have run an alarm at Pat Quinn's old place. I paint homes for battered women and it's all hush, but because I got caught rolling a dube outside of a hockey arena on a Friday night (I was a goalie and it was my 4th game that day, just came from a game in UBC and old body armor sucked... the guys were freaked saying my body was green lol... bruises). I played for many teams back then... and it's still about $1000 to get a pardon... that buys me a new rc ;) .. I got the minimum fine and the judge was annoyed it even came to court it was so minor and put a blemish on my record. I actually lost my security license (not just guard work I have a few levels doing alarm installation and monitoring, investigations, patrol and alarm response).. I had to write the attorney general. I was a volunteer member of the parks board, president of the rc club, do volunteer work for the handicapped blah blah... and got it back a couple months after the red tape was gone... only people that have a problem are the borders, go figure. I was even approached by a rep about becoming a prison guard. they came to me while supervisor of a large mobile fleet and brought me an application haha. In Canada I am an ok dude I guess

[mooman007uk]

I'm not allowed in either...oh boo hoo...actually i think about 30% canadians are barred, most for the pettiest of misdemeanors from their youth.
Last time i went to cross had an interview, apparently I'm now considered rehabilitated :surprise: just need to get a visa and pay $585 for my waiver, already recommened on my file for re entry just got to stump up the cash and the desire to go back to the land of the.. er.. freeLOL


didn't realise Dino was so close, he could throw us pipes across zero avenue

[highwaystar]

I an so thankfull that Homeland Security is keeping rascals like you guys out! LOL Honestly I think that is the gooffiest thing I have ever heard!!!!! Ten's of thousands of people cross our Southern border, and you guys can't get in? WOW! Atleast I can sleep at night knowing that Moo & Pipe can't sneak across the border snag my R/Cs and bash them to death, only to put them back. Leaving me with tattered and torn cars!

[Pipeous]

I've been meaning to do the pardon for a while. I would like to get lazer surgery done to my eyes this year though. about the same cost. after the eyes I'll look at the pardon. anyway. I am up after a 2 hr power nap so I can call Dino

[Pipeous]

ok just got off the phone. I'll have a bunch more pics by the weekend.. above is just the prototype and not completely welded up. it will be getting chromed and he's making about 20 or 30 to start of each type for us by the weekend... there will also be the option of a silencer... he has a really cool idea for a plate that goes under the wing to strengthen that and can mount the silencer add on to it. keeps heat away and adds strength

another cool thing is the hpi drag pipe will fit with a couple mods. that is one big insane beast, so that will be an option for buggy and trucks... and then a single side pipe...

I sent Chris a PM with Dino's contact info. he really wants to work with us and produce a wide variety of pipes. He was truly impressed with the designand layout, even to say the tires and wheels included are the nicest of any rc he has had in his shop, and that says a lot. very beefy

oh and I got a blue body LOL.

[mradlin]

That's great news Barry!!!

Have a pipe for me sent with your buggy. ;)
How can we get our hands on these pipes?

[highwaystar]

You guys will be able to get them straight from Dino. Just give him a call !-800-4-JETPRO.

[roccos_van]

Yeah it's a matter of $$ if you want to get the pardon; IMO its just a gov't cash grab.

Thanks for the updates, looking forward to getting an rtr nutech with one of these jet-pro's.

MB

[Pipeous]

Well Dino is even interested in working something with Nutech on a mass production deal. He had some cool ideas. he is making a double flange on the header so it won't have to be removed from the engine for working on the buggy. there will be a break point a few inches away

he really likes chroming the pipes for strength and finish, though he will look at some ideas for making a black pipe... said most guys wanting a black pipe just want something cheaper ;)

The more I talk to him, the more I am liking the guy. Down to earth, mind is always going and thinking of ideas. He tossed a lot of ideas at me and I can't honestly remember everything he said... I was trying to look at the pipes on onb as he mentioned how they could adapt..

and the main concern of pipe 1 was to be protected and not melt anything. the side pipe we figured going down the gear side would be best and the gas cap will be accessible. the drag pipe can be blocked off at the header end to have a single output left or right depending on track, or leave it for what a couple guys I know own them say is the craziest power pipe for a baja made... my bud Gord has 5 different pipes for his baja so lots of comparison. he runs dually wheels on back so wanted more poop and he can dig trenches with duals on back... I hope I get one of those to test hehe... should fit the mt nicely, when I can afford one :D

we sent each other emails so good to go. I'll have a buttload of pics to post by the weekend

[highwaystar]

Well Dino is even interested in working something with Nutech on a mass production deal. He had some cool ideas. he is making a double flange on the header so it won't have to be removed from the engine for working on the buggy. there will be a break point a few inches away

he really likes chroming the pipes for strength and finish, though he will look at some ideas for making a black pipe... said most guys wanting a black pipe just want something cheaper ;)

The more I talk to him, the more I am liking the guy. Down to earth, mind is always going and thinking of ideas. He tossed a lot of ideas at me and I can't honestly remember everything he said... I was trying to look at the pipes on onb as he mentioned how they could adapt..

and the main concern of pipe 1 was to be protected and not melt anything. the side pipe we figured going down the gear side would be best and the gas cap will be accessible. the drag pipe can be blocked off at the header end to have a single output left or right depending on track, or leave it for what a couple guys I know own them say is the craziest power pipe for a baja made... my bud Gord has 5 different pipes for his baja so lots of comparison. he runs dually wheels on back so wanted more poop and he can dig trenches with duals on back... I hope I get one of those to test hehe... should fit the mt nicely, when I can afford one :D

we sent each other emails so good to go. I'll have a buttload of pics to post by the weekend

Like the man said Dino is a great guy to deal with!

[Clubin]

Wow this JP/Nutech thing is sounding good! How cool would it be to buy a Nutech with a factoryinstalled PIPE! Awsome. Well done guys.

[mooman007uk]

I an so thankfull that Homeland Security is keeping rascals like you guys out! LOL Honestly I think that is the gooffiest thing I have ever heard!!!!! Ten's of thousands of people cross our Southern border, and you guys can't get in? WOW! Atleast I can sleep at night knowing that Moo & Pipe can't sneak across the border snag my R/Cs and bash them to death, only to put them back. Leaving me with tattered and torn cars!

too funny.

It's a great bonus to have Dino on board..sounds like he's really liking the nutechs, the MT side pipe definitely wants to go down the gear side like the VRC pro i got...tucks in perfectly and clears everything it needs to...

[highwaystar]

too funny.

It's a great bonus to have Dino on board..sounds like he's really liking the nutechs, the MT side pipe definitely wants to go down the gear side like the VRC pro i got...tucks in perfectly and clears everything it needs to...

Give him a ring and let him know how you feel!

[Pipeous]

Dino just emailed a couple more pics so thought I'd post them up

[Pipeous]

pics tomorrow of the side pipe....

[highwaystar]

That looks great! The chrome is slick!

[mradlin]

The pipe is looking great!! I can't wait to see what Dino came up with for the side pipe. :excited:

[Clubin]

That looks |GOOD| I am looking forward to seeing the side pipe.

[PSR Australia]

I dont want to change this thread from being about the Jetpros but just wanted to mention that I asked Dave from VRC about Nutech pipes and he is interested.

[mooman007uk]

the more the merrier, got an email for him, i'll send him pics of my vrc pro mounted

[PSR Australia]

It's on the shop computer hang tight till Monday.

[mooman007uk]

will do, also want to see what can be done with the new XT5..i'll be taking measurements and a gazillion pics at the show that i'll send to Dino and Dave so we can get the 2 best pipe builders there is on board with it... an OBR 30.5 full mod 4 bolt zen and vrc pro has to be available for the XT5, best truck with best engine pipe combo just makes me do this
http://i729.photobucket.com/albums/ww294/mooman007uk/monkeydrummert.gif

[Pipeous]

Dino emailed me today to say the side pipe is done and he took one pic before the camera died, then forgot to send me the pic lol... he said it'll be chromed in the next 2 days then I can get my buggy to play with... should have it here long enough to kill the pre production dif cases, then Scott can sell me some aluminum cases :D

[mradlin]

Sounds good!! I can't wait to see what Dino came up with. :excited:

[mooman007uk]

man he works fast...can't wait to see some vids of them in action...pipe i take it yours will be coming sans rear pipe

[Pipeous]

Both pipes coming, just waiting for this one to be chromed. He has a bunch of the rear pipes ready to be installed allready done and just finalizing production for these

http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00031.jpg

[gordy p]

That's a real shame, was hoping this pipe would be under the shell, in the UK our pipes have to be covered to be race legal.

[dc2 man]

man those are gorgeous pipes...

well done jetpro,could jetpro be the leaders the way things are going:surprise:

[Pipeous]

that would fit under one of sickboy's shells, just the tip be sticking out. http://www.nutechracingforum.com/vb/showthread.php?t=322&highlight=body

I am looking at those buggy bodies. they also make carbon fibre wings (drool)

[Clubin]

Both pipes coming, just waiting for this one to be chromed. He has a bunch of the rear pipes ready to be installed allready done and just finalizing production for these

http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00031.jpg


Damn I would like that pipe better with the raw look. The chrome is nice, but I like the Raw look better. I do like it alot. It looks a lot like the Rampage pipe but it is on the other side.

Damn Dino works FAST! Good looking side pipe.

[Pipeous]

I almost bought the rampage pipe like that for my rally car. the add on silencer can be pointed down to for those that needed it.

I can see the body needing a bit of cutting to fit this pipe. I'll test both out and see what I like before I hack the body up. and you know Dino isn't finished yet ;)

[bentley marshall]

i had a carson side pipe on my sand storm but ended up geting dented very badly....i think that jet pro side pipe will end up the same its sitting way to low .....

[bentley marshall]

http://i43.photobucket.com/albums/e372/1bent1/sandstorm010.jpg

[sickboy]

i had a carson side pipe on my sand storm but ended up geting dented very badly....i think that jet pro side pipe will end up the same its sitting way to low .....

mmm but is there a way to fix the height of the pipe what higher,
where the joint it or is it a one peace pipe,
If not then it would be a good idea to do it that way then we could mount it where we prefer

Something like this i use the on my other gasser

[gordy p]

What carson was that pipe for - it looks exactly what I'm after?

[bentley marshall]

the pipe was made for the carson gas devel-smartech titan

[bentley marshall]

heres what the pipe looks like now after 2 race meetings

[sickboy]

dont blame the pipe mucker its your driving LOL
seriously and that after 2 racers mmm:beat dead horse:

[Pipeous]

a jet pro won't dent like that. it's not cheap aluminum for one. I had the v2 mt pipe on my fg. I flipped it bad enough to shatter my body and not a mark. that pipe sits high. I kept driving without a body and smacked it many times to the point of breaking my front mount. that's why jet pro has one of the best warranties in the business (and the chroming helps with making them tougher)

[Pipeous]

Here's a couple pics with the silencer attatched
http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00032.jpg

http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00033.jpg

[Clubin]

Yep, that looks good but it won't fit the MT without cutting the rear of the box off.

[Pipeous]

just asking for a side pipe with down pointed exhaust as well for you mt guys. I mentioned the raw look. the buggy is what I could get my hands on for him to work with. if he had a body and such...

am sending the rc innovation thread to show the mcd body to try and get something for the uk guys figured (still can't see a problem in the tip facing out the upper side on right to exhaust. it's either out there or the bottom...same difference really)

[bentley marshall]

dont blame the pipe mucker its your driving LOL
seriously and that after 2 racers mmm:beat dead horse:

im not blameing the pipe im just saying that its likely to get damaged being that low on side .....

it got one dent in it after 2 laps and i dont recall hitting anything LOL

yes i drive hard

i have now fitted a titan jetpro pipe

[sickboy]

I do like that pipe it seams to be out of harms way all nice and tight think this pipe will be on the wanted list for sure

[Pipeous]

I just talked to Dino, via email, and showed him Clubin's pic. He has an FG Hummer body. Is that the same width as the Nutech MT? It's tough figuring something to fit without all the info. If the bodies are the same size basically, then he can make new mounts for his 5T pipe to fit and use that to work with

For the UK guys, it's hard to come up with anything that is hidden until there is a new body available. We really need to get some product into Dino's hands so he has more to work with than just the buggy as it sits. He is guessing right now at some of it

[highwaystar]

It would be great to see the factory step up and help out instead of the customers having to do all of the leg work. Just my $.02.

[RCKIWI]

I am sure Chris will step up if he has been asked???

[mradlin]

I am sure Chris will step up if he has been asked???

Chris is also pretty busy getting ready for the show in Germany. Maybe send him a PM to let him know?

[Pipeous]

Ya I pm'd Chris, he said to me the show was keeping him busy. I don't want to keep bugging him, I understand...

so can anyone confirm an fg hummer body is the same width as the nutech? it will help with fitting the 5t pipe in. I gather info try to shorten it, and then email dino. saves him time reading the forums

even if we could get a fuego and mt body in his hands he would see what he has to work with for room. and of course a wider buggy body when available. Could someone that distributes even toss him a body or 2? I am sure Chris and Ethan will take care of you guys later anyway. I can leave my buggy there for another week if need be

I check all the threads of what you guys have allready done and tried. I try to pass that along too.

Time isn't the issue. Ya I want the buggy here, but I have other toys to play with... and I am doing electric indoor racing... traded a detail for another rc today so I have 3 classes to play this weekend :D (it's a big badass dodge 4x4 dually and black... regular customer and a 10 hr job).

[VancouverHobbies]

The MT body measures 10 1/4" wide at the narrowest point. :)

[Pipeous]

Here's something that will fit the MTs, Fuegos and Sandstorms

http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00035.jpg
http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00036.jpg

[mradlin]

It's looking good Barry!!

tell Dino to keep up the good work!

[Pipeous]

another should be done this weekend, so that makes 2 pipes for each model to choose from. Something for everybody, until the wide buggy bodies come out that is

[jesi]

Pipe in latest pics, maybe end of pipe is too low?
I mean easy damage for pipe and in worst case, for motor.

[CAR-KILLER]

Here's a couple pics with the silencer attatched
http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00032.jpg

http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00033.jpg



any more news on this bad boy

[Pipeous]

I've been working and racing all weekend so haven't called Dino in a few days. The buggy pipes are ready for sale. The MT pipe I am going to assume is ready by now at the rate Dino works. And I think it looks to sit fairly high. by the pic it exits around the bottom of the pull start area which is above the chassis bottom. I'll ask for a side pic so we can see better. sometimes the angle of a pic can be decieving.

woohoo I haven't raced for a couple years (2 weeks ago won't count because I thermalled after 3 laps each time). I TQ'd and won one class and got I believe 3rd in the a main in the other. I only had a mamba 6900 to run and my truck was too fast!! Only able to use 1/4 throttle most of the race. one qualifier I went from 4th to 2nd in one jump. 3/4 throttle and I cleared the end of the track over the o ring and landed in front of the jump. I can't wait to see the video. it was about 25 feet of air. the old fart's skills haven't totally failed me yet hehe

bad note? my bike took a beating in novice class lol. I think I blew my gyro in the mains. running a 5th scale on a 10th scale track is way too hard. the bikes don't transition fast enough for switchbacks. crowd loved it and cheered the jumps. fun but aggravating

[mradlin]

I've been working and racing all weekend so haven't called Dino in a few days. The buggy pipes are ready for sale. The MT pipe I am going to assume is ready by now at the rate Dino works. And I think it looks to sit fairly high. by the pic it exits around the bottom of the pull start area which is above the chassis bottom. I'll ask for a side pic so we can see better. sometimes the angle of a pic can be decieving.

woohoo I haven't raced for a couple years (2 weeks ago won't count because I thermalled after 3 laps each time). I TQ'd and won one class and got I believe 3rd in the a main in the other. I only had a mamba 6900 to run and my truck was too fast!! Only able to use 1/4 throttle most of the race. one qualifier I went from 4th to 2nd in one jump. 3/4 throttle and I cleared the end of the track over the o ring and landed in front of the jump. I can't wait to see the video. it was about 25 feet of air. the old fart's skills haven't totally failed me yet hehe

bad note? my bike took a beating in novice class lol. I think I blew my gyro in the mains. running a 5th scale on a 10th scale track is way too hard. the bikes don't transition fast enough for switchbacks. crowd loved it and cheered the jumps. fun but aggravating

All in all sounds like a great time Barry!!
I look forward to seeing the pics.

[Vertigo Performance]

Pipeous, Glad to hear it all worked out for you. That pipe looks really nice on there.

[Pipeous]

Thanks Clayton. You played a big part in this too. If it wasn't for you this would never have happened.

I just finished my marathon of working and racing.. finally 3 days off and not working or doing anything for anybody. I'll contact Dino and see where we are at and update. Then I can sit down in front of the fight network for about 10 hrs and service all my rc's

[Vertigo Performance]

Thank you,

What about the hockey game, or is that what you meant by the fight network? LOL!!

[Pipeous]

I just got digital tv last week and have only watched about 20 mins since I got it. I am a huge martial arts fan and have friends fight in different organizations. all we see normally is ufc, but I like stand up stuff too like K1 and such.

[mradlin]

I called Dino yesterday and ordered myself on of the TB2 rear pipes!!

He's a great guy to talk to and loves his work!

I can't wait for it to get here!

[Pipeous]

I can't wait myself Mike. Dino said he was going to ship my stuff out soon. Nobody from Nutech ever contacted him though

[NUTECH RACING]

Pipeous, will contact Dino later.

Thanks

[PSR Australia]

We contacted Dino a week or so ago and he wants us to distribute Jetpro in Oz:good idea:

[mradlin]

We contacted Dino a week or so ago and he wants us to distribute Jetpro in Oz:good idea:

Thyat's great new Mike!! :party time:

[jesi]

We contacted Dino a week or so ago and he wants us to distribute Jetpro in Oz:good idea:


I did not find any email address to dino/jetpro?

Also interested for selling jetpro.....

[jesi]

Fak!

I'm not so good talking in phone, with english...

[mradlin]

Fak!

I'm not so good talking in phone, with english...

you have a PM jesi. ;)

[jesi]

Thanks for helping me out!

[Pipeous]

http://innovativehobby.com/smartechtitanpipe-silenced-1-1.aspx

allready getting to be available at distributors now. Dino said my buggy should be here Friday!!

[CAR-KILLER]

that means you can get out ond get it dirty ...will you have a pipe on it

[Pipeous]

oh ya, I have a couple pipes coming to try. going to be testing both the rear and side pipes out to see how they perform. also an fg side pipe for my on road. I really like Jet Pro stuff. Sending the semi down as soon as my GT5R arrives too for the stacks to be made... then I will have a spare Samba 4 and the GT5R pipes sitting around. Other FG has a VRC. I cut the body to fit it so not much chance of changing it over now.

I also wanted the side pipe because I plan on getting a Horman body from Sickboy as I like that wide look

[mradlin]

My TB2 pipe should be here soon. :band:

I can't wait to fire it up and try that Jetpro pipe out.

[O.J.Racing]

From my investigations in to pipe options for the BRCA nationals here the rear pipe would not be legal under the sections present rules.

However my investigations have led me to believe that the JetPro pipes are awesome. So I can’t wait to see some photos of there side pipe as this may well be the option for me.

If any one has any photos they could post up that would be great??

[Pipeous]

http://i304.photobucket.com/albums/nn181/Pipeous/RC/Nutech_TB2/PIC00031.jpg

Toss one of these buggy bodies on
http://www.nutechracingforum.com/vb/showthread.php?t=322&highlight=body

[O.J.Racing]

That looks awesome any idea when they will become available to the public?
Also will there be a silenced version of the pipe?

The buggy body and side protectors look great how much are they and are they all carbon or lexan?

I bet your itching to hit the local track with the buggy be nice to see a video.

[gordy p]

also not legal also never get a shell it will fit under

[gordy p]

it looks like a demented chilly:going insane:

[O.J.Racing]

Nutech already know about the shell and They may well have a wider shell available soon, that a side pipe may fit under.

[O.J.Racing]

The 23cc engine in the FTX is this powerful enough on both bottom end and top end, or would you think a 26 or 29cc would be better??

[Vertigo Performance]

The midrange is where problems come about with a 23cc. When the Baja first came out it had killer bottom end, midrange was so bad preparing for jumps on the track was difficult. I could see a 26cc being the key for this buggy.

[cabbie]

Any more info on when the Jetpro will be for sale in the UK?

[Pipeous]

you can contact Dino direct and he'll ship to the UK np. Pipes are ready for sale, or go to innovative or?

and you'd have to contact sickboy about the body price. they are fibreglass and the sides look like carbon. I have one of his vw bodies and I love it.

[cabbie]

Is there an email address for Dino?

[Pipeous]

email and phone number is in this thread

[cabbie]

email and phone number is in this thread

I've just searched all 10 pages and must have missed it!

Any chance you might give me a small clue as to Dino's email address where abouts?

[Vertigo Performance]

www.jetpro.com

They were only sold through another company until recently. From what I hear he is just setting up for internet..

[cabbie]

http://www.jetpro.com/

Still can't see his email address!

[Vertigo Performance]

Mradlin was saying that Jetpro had some computer technicalities, I am trying to track down their email address for you, I can't say whether he will get back to you really soon or not though.

[cabbie]

Thanks Clayton


PS. what the bollox is 1.800.4JETPRO all about?

[Vertigo Performance]

I am talking to Dino now..

They have one pipe sitting there, all the rest are being shipped out to dealers.

[cabbie]

Thanks for the help bro, I sent an email, fingers crossed he has one for sale.

[Vertigo Performance]

He is checking your mail now..

[cabbie]

Thanks bro.

[cabbie]

He is checking your mail now..

I'll have to get his reply in the morning, I've got to hit the sack. :good idea:

[Vertigo Performance]

Sorry, we ended up in a long conversation.. I was told of the pipes sitting there he has one left from this run that he can sell you.

[mradlin]

I just received my TB2 Jetpro rear pipe today!!! I will post up some pics tomorrow. :surprise:

[cabbie]

Sorry, we ended up in a long conversation.. I was told of the pipes sitting there he has one left from this run that he can sell you.

Thanks for the help Clayton, deal done and pipe is on it's way to London :yahoo:

[Vertigo Performance]

Glad to be of service!! If I ran pipes I would opt for a Jetpro.

[cabbie]

Glad to be of service!! If I ran pipes I would opt for a Jetpro.

How long till we see Vertigo Performance FTX Hop Up's?

[Vertigo Performance]

We need to wait for more cars to be on the market.

Right now we are working on 2 items and have the rubber sealed bearings already available.

[cabbie]

We need to wait for more cars to be on the market.

Right now we are working on 2 items and have the rubber sealed bearings already available.

It needs a redesigned steering set up that uses 4mm screws in the anchorman plate and upgraded front turnbuckles with inner 4mm screws too.

[Vertigo Performance]

Do you mean ackerman plate ;) I will need to dig the TB II out and take a look.
expect some things in the spring.

[cabbie]

Do you mean ackerman plate ;) I will need to dig the TB II out and take a look.
expect some things in the spring.

http://www.nutechracingforum.com/vb/showthread.php?t=550

[Vertigo Performance]

We can look at a carbon ackerman plate. I will pick up my car and see what I can do in the next few days..

[Pipeous]

Put some flanged bearings in it too Clayton and put me down for one ;)

How about a screw kit too? go nice with the bearing kit.

The add on silencer I just looked and it bolts to the roll cage. nicely done Dino. I will try with and without the silencer. Only the rear pipe showed this time around. Dino is going to send the other. they wouldn't fit in the box... and UPS raped me yet again. It's worth paying for expensive shipping because it's cheaper in the end. they charged me $78 brokerage fee on top of taxing me on the declared value (almost $1100 declared ouch) lol.

Just trying to figure out a battery setup. ripped apart a 4600 stick pack and looking for a bad cel right now. I can't fit any of my lipos in the tray and I just picked up another castle bec. I might just mount the lipo externally.

[Vertigo Performance]

We don't do screw kits. There are companies like Fullforce that would be better at that kind of item.

You should be getting your UPS packages sent to the letter carrier in Point Roberts.
This way you just pay tax or get it shipped USPS Global priority.

I will look at items for the FTX and Nutech next week seeing as how they are gaining popularity quick

[Pipeous]

I would have driven to spokane if I could cross the border LOL

[Vertigo Performance]

LOL! you and Mradlin should bust out of Canada and go on the run!

[Pipeous]

It really drives me nuts. $25 fine haunts me for life. Yet in Canada my security clearances allow to to go anywhere really. I've done security for political mp's, escort service for call center staff for battered women and such, pi crap on and on... been in bank vaults, diamond vaults, worked the movie industry....

[Merlin]

Were can i get my hands on the jet pro pipe fellas?

Cheers
Paul.

[Vertigo Performance]

Australia - Powerslide Racing .. info@powerslideracing.com.au
Canada - Vancouver Hobbies .. snbmotorsports@live.ca
USA and other parts of the world - Jet Pro .. Flashburn12@hotmail.com

[Merlin]

Thanks Clayton, i did email jet pro direct a few days ago and got no reply, i guese hes just busy. I will try one of the other distys :)

Thanks for your help!

I'm in the UK BTW :)

[Browny]

I sent a couple of emails with no success. I finally called him on the phone. Nice to talk to etc. He might be having some email probs as he told me he had tried to email one customer with no success.

[Merlin]

i got wrong number when i tried, i will try again later.

[Pipeous]

Dino is a phone type of guy, email isn't his thing

[Merlin]

Whats the number coberted into numbers rather than 1800 jet pro lol just to make sure i am dialling the correct one, as i keep getting wrong number dialed.

[Pipeous]

1 800 4 jetpro
1 800 453 8776

[Merlin]

Thanks, just ordered mine :D