View Full Version : FG Leopard shell on TB2
gordy p
01-18-2010, 10:20 PM
Has anyone got an FG leopard shell they can try on a TB2, it's a shell we can get cheap in the UK and would mean we can get a pipe under in.
Chicony-Tuning
01-18-2010, 10:25 PM
the Leopard body ist too short.
The wheelbase of FG Leopard is 47cm, the wheelbase of TBII is 53cm
RCKIWI
01-19-2010, 12:28 AM
The FG Leopard is 505mm, TB2 is 520mm wheelbase so should fit ok!
pwaicon
01-19-2010, 01:27 AM
Has anyone got an FG leopard shell they can try on a TB2, it's a shell we can get cheap in the UK and would mean we can get a pipe under in.
I have a Leopard, when I get a chance I will take a pic for you.
mooman007uk
01-19-2010, 03:57 AM
the race runner will fit wont it? you got one of these on the ramp will it fit the nuey...also wider so a pipe could be enclosed for the euro racers to comply with the rules there
pwaicon
01-19-2010, 07:24 AM
Moo,
The RR body should fit and I actually prefer the look of the RR body compared to the Leopard. I believe RCI is using a RR body on his TBII build up he is working on at the moment.
Here are the pics of the Leo body on the TBII. I just have it lying on there so it is a little high, but with some trimming you should be able to get it to fit quite nicely.
597598599600
NUTECH RACING
01-19-2010, 07:40 AM
Looks nice, just the rear seems a bit short.
pwaicon
01-19-2010, 07:56 AM
It is a tad short in the rear; it doesn’t quite cover the side guards. I can’t wait to see the wide version of the TBII body you are making.
NUTECH RACING
01-19-2010, 08:08 AM
I did not see the modified TB2 wider body yet.
Chicony-Tuning
01-19-2010, 10:11 AM
The FG Leopard is 505mm, TB2 is 520mm wheelbase so should fit ok!
Hmm OK when it is 505mm then it will be fit with smal modifikations
Chicony-Tuning
01-19-2010, 10:47 AM
the race runner will fit wont it? you got one of these on the ramp will it fit the nuey...also wider so a pipe could be enclosed for the euro racers to comply with the rules there
Rules Gasoline Off Road OR6/4WD
Chassis:
Dimensions: Total length of the vehicle's overall max.810mm. Overall width max.490 mm. Overall height max.380 mm. Allowed only 4WD Fahrzeuge.Fahrzeuge with exposed chain drive or belt equipped with a position Ketten-/Riemenschutz must have. This protection must be such that it can from the chain / belt proceed injuries.
All vehicles must have a vision Arrow "Engine off" to have the appropriate space on the body.
Minimum weight:
The minimum weight is measured in the state with an empty tank and ready to race without transponders.
The minimum weight must be present at any time of the race.
Minimum weight OR6/4WD min.11000 g.
Body:
The body should correspond vehicles, such as those used in off-road, desert, or trial race. Monster Truck, Monster Hummer and Jeep bodies or similar bodies monster tires also can be used in conjunction with off-road.
Wing / Spoiler
It may only be Lexan or plastic are used to reduce the risk of injury.
Allowed is a wing with the dimensions:
Max.315mm width, depth max.140mm, height max. 360mm. Surplus max.150mm
Engine:
Allowed are 1-cylinder 2-stroke engines up to max. 26 cc, with spark ignition.
Silencer:
The silencer must not extend beyond the chassis dimensions.
An effective 2-chamber or 3-chamber muffler is provision ..
Tank:
The tank must be fitted with a screw cap or a snap closure. Fuel tank capacity max. 800cc.
Fuel:
Allowed is lead-free fuel for road service stations. The only permitted addition is 2-cycle oil in the
Original mixture of the manufacturer at no additional chemical admixture.
Tires:
It may only be used off-road tires. Profile-tires and monster tires are not allowed.
Brake:
The model may be operated only with effective brakes. Hydraulic, pneumatic or mechanical Einzelradscheibenbremsen to rear and front axle are permissible.
Differential Gears:
All types of mechanical, hydraulic and magnetic lockable differentials are permitted.
Electronically lockable differentials are not allowed.
The DMC rules are much expensiv
The Silencer must be under the Body :beat dead horse:
Silencer and Airbox must have a DMC Number
gordy p
01-19-2010, 05:11 PM
Cheers for that guys.
The MCD shell is a nicer looking shell, just couldn't bring myself to put an MCD part on the Nutech. As you can tell I'm a big fan of MCD:beat dead horse:
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.