PDA

View Full Version : Where to get bits


gordy p
02-08-2010, 10:35 PM
Right - I'm desperately after some bits, as parts in the UK are still hard work.
I'm after a set of MT wishbones and drive shafts and 3degree rear towblock. The car desperately needs this one. And after MT wishbones and shafts, as the rules for 4wd in the UK allow us to make the car quite a bit wider than the TB2. Can't get these parts over here - can anyone point me in the right direction?
O.J.Racing
02-09-2010, 01:00 AM
have you tried Shopatron on the CML website, as they list most if not all parts available.
gordy p
02-09-2010, 01:16 AM
Yes no luck thay don't hav any of it
mradlin
02-09-2010, 01:40 AM
Where are you located Gordy?
O.J.Racing
02-09-2010, 01:57 AM
Where are you located Gordy?

He’s from the UK;
O.J.Racing
02-09-2010, 01:58 AM
I know our distributor CML are due a delivery soon.
mradlin
02-09-2010, 02:11 AM
If CML doesn't have it, maybe check with the forum sponsors. Check all of the banners on the left side of the forum.
RCKIWI
02-09-2010, 03:26 AM
You prob won't find anyone with MT related parts in stock as the cars have only gone into production!
PSR Australia
02-09-2010, 06:30 AM
If you have an MT already you must have got it direct from Chris and that is the only way you will get parts until the first shipments start arriving at distributors (Ours will be mid March now)
O.J.Racing
02-09-2010, 06:02 PM
Talked with Jason at CML today and he confirmed that CML have plenty of spares in stock.

See other thread.

http://www.nutechracingforum.com/vb/showthread.php?t=570
Clubin
02-09-2010, 08:39 PM
You prob won't find anyone with MT related parts in stock as the cars have only gone into production!
Vancouver Hobbies has a bunch of parts in stock. Drop Gas Jockey a pm.